The 10 Scariest Things About Patio Doors Repairs

Sliding Patio Doors Repairs

Your sliding glass patio doors help to let in more light and increase your home's energy efficiency. However, over time they could show signs of wear and tear, which will require some maintenance.

Fortunately, the majority of issues with sliding patio doors are simple to fix. Find out more about how to keep your patio doors looking and functioning like new:.

Dirty or damaged tracks

The tracks of your sliding patio door may be filthy or clogged. Over time, the dirt and grime of daily usage can accumulate on the track. This can cause the jam to break or to break down completely.

Including regular light cleaning of sliding doors and their tracks in your household chores can help to reduce the amount of build-up. Start by sweeping or vacuuming large debris off the tracks. Then, use warm water and non-abrasive cleaning products, such as dish soap, to wipe them down. A little vinegar added to your cleaning product can also help remove stubborn grease and dirt staining.

If your sliding door still won't move smoothly after following these steps, it may be the sign of more severe damage and requires a professional repair or replacement. There are a few simple solutions you can try before calling in professionals to avoid costly repairs or replacements.

It is essential to put a doormat on the bottom of your sliding doors to help keep dirt out before it has the chance to reach the tracks. Regularly trim any plants and bushes that are near your sliding door to reduce the amount of debris that is tracked into the tracks. Close the door properly to ensure that you don't damage the rollers or wheels. You can extend the life of your doors by keeping them clean and lubricated.

Rollers that are misaligned

Sometimes it happens that a sliding patio door becomes out of alignment or becomes stuck. Usually, this is due to obstructions such as dirt or other which can be easily removed. Sometimes it's due bent track or a bent roller. In this situation you can re-align the rollers by removing them by using the adjustment screws and cleaning with the rubbing alcohol. Be cautious when working with these parts, as they are delicate.

If your doors are sticking, you can lubricate the rollers. This will lessen friction and allow them to move more easily. It is recommended to make use of a silicone-based lubricant because petroleum-based lubricants can draw dirt more quickly. It is also important to clean the tracks and rollers prior to lubricating them.

After cleaning the rollers you can put them back on using their adjustment screws. Use the same lubricant that you used to clean them. When you reinstall the rollers, ensure that you push them all the way into their channels. You can now test your door and see if it glides smoothly.

If the problem continues it could be necessary to uninstall your door and inspect the tracks and rollers for any other issues. If the tracks or wheels are bent in a way, you may need to replace them. In such a scenario it's a good idea to call in a professional for the installation.

Warped Glass

Sliding glass doors are great for bringing the outdoors and natural sunlight into a space, but they can also be susceptible to damage that requires repair patio doors or replacement. Cracks, warping and fading are a few of the most frequently encountered issues. Warping occurs when the components which make up your sliding glass patio door start to degrade due to sun, heat and other environmental factors. Cracks are often caused by impact damage, such as from a lawn mower or ball run-in, and fading generally happens due to repeated contact with sunlight and other natural elements.

If your sliding glass patio doors are difficult to close or open it could be a sign that the tracks and rollers aren't working properly. This problem may be caused by accumulated dirt, rust, or debris in the wheels or track or a lack or lubrication. Cleaning the tracks and rollers, removing obstructions and applying silicone spray may aid in resolving this issue.

The locking mechanism might be faulty and make it difficult to open and close your sliding patio doors. This could be due to misalignment or wear and tear, but a simple fix is to adjust the locking mechanism by turning the adjustment screws that are located in the bottom of the track.

Air leaks or drafts around your sliding patio door are a frequent issue that can affect the efficiency of your home's energy usage. They are usually caused by damaged weather stripping and an improper alignment of the door, which is easily fixed by replacing the old weather stripping and aligning the doors.

Loose Handle

If the handle of a sliding door becomes loose, it can be quite frustrating and make it difficult for people to open the door. This is typically caused by a misaligned locking mechanism, which can be corrected by loosening the screws that secure it and tightening them until they fit against the jamb of the door.

A loose handle could be caused by the handle becoming detached from the spindle that connects it to the inside or handles outside. This is typically the result of a mix of factors, including excessive use wear and tear or simply the general aging. If the issue isn't dealt with promptly, the handle could become loose and fall off.

The best way to fix this issue is by first finding the screws that connect the interior and exterior handles. They are typically hidden by tabs made of plastic, which can be removed with a flathead screwdriver (or in the case of certain handle styles, a Phillips-head screwdriver). It's a good idea store these screws somewhere safe so that you don't lose them.

After removing the old handles, the next step will be to take off the spindle. This can be done by tapping the spindle with a hammer or mallet until it comes loose from its place within the door. The new handle is fitted by placing the spindle in the handle hole inside and the other end through the exterior handle hole. After the handle is installed then tighten it by screwing back the screws, and then test to make sure the lock and unlock mechanism is working correctly.

Faulty Weatherstripping

Weatherstripping that's damaged or cracked can let air and water seep into your patio door, which can compromise your home's comfort and energy efficiency. In addition to allowing water, it can also cause drafts and increase your heating or cooling costs. It's easy to replace faulty weatherstripping without professional assistance. You can take off the old weatherstripping by loosing the staples using the help of a screwdriver or by gently prying it with the help of a putty blade, and then pulling it from the door. Then, you can wash the area and apply a fresh layer of weatherstripping. This is backed by a foam seal to ensure that there are no leaks and to increase comfort.

If your sliding patio doors are no working as they should, it's essential to address the issue immediately to prevent further damage and keep them functional for a long time to come. Depending on the severity of the issue is, an DIY solution or a professional repair/replacement could be the best choice.

The majority of sliding patio door issues are caused by dirty rollers, misaligned tracks, and a loose handle. In most instances these issues can be fixed through regular maintenance and cleaning, including lubricating the track and rollers, as well as adjusting them and tightening the hardware. If these solutions don't work it is recommended that you seek advice from a professional to make sure that your patio is operating exactly as it should. Review the warranty information before you decide to replace or repair your patio door repair company door. This will save you money in the future for repairs and replacements.