15 Secretly Funny People Work In Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are durable, long-lasting and easy to maintain. In contrast to aluminium and timber, they don't get rusty or decay.

It is important to clean and oil UPVC windows and doors on a regular basis. This will reduce repair costs and improve energy efficiency.

1. Broken Glass

The broken glass in your windows can cause significant damage to your home and even be fatal. It is essential to ensure that your windows are in good shape.

For single pane windows it is relatively easy to replace them, and the replacement will usually fit inside the old frame very easily. If windows with double panes are joined by internal beading, it will be more difficult to remove and replace the old panes. In this instance, you will need to find some plastic spacers to aid the new pane in being able to fit perfectly into the window repair near me frame.

If you are going to try to remove the window panes yourself it is crucial to wear the proper safety gear such as gloves that are thick and protective eyewear. It is also recommended to lay down a drop cloth before you begin working on the window panes to ensure that any shards fall on the fabric, not onto the floor, where they could be trampled under.

Once the glass is removed from the window, it's best to seal the gap with some clear packaging tape or duct tape to block drafts and water from entering the home until a professional is able to come out and repair the window. This will also act as a barrier, deterring any intruders from gaining entry to your home. If the gap is particularly large, you may be interested in a security door that has an integrated window, as it offers the best of both worlds.

2. Sagging

uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash windows. However, over time they are susceptible to a range of issues, including sliding. A window that isn't properly aligned can cause problems with light, draughts and even security. It is crucial to act as soon as you notice your upvc window repairs near me windows are falling down.

To fix a sagging window you can try to reposition the hinges. First, you'll need to unblock the windows to get at the frame. Then, remove both the top and bottom hinges using a screwdriver, and then adjust them counter-clockwise or clockwise. Close your window to test the fit after you have relocated your hinges. If you are happy with the fit of your window, tighten the screws to hold them in place.

If you cannot reposition the hinges, you might have to replace the seal. Seals made of rubber can dry out and lose their elasticity over time, leading them to loosen. If this happens, it's essential to replace the seal as fast as possible so that your uPVC windows are watertight and draught-proof.

upvc window repair near me handles may also become loose. Most often it is due to screws that have become loose over time. However, it can also happen because the handle mechanism has been worn out. It's relatively easy to fix a loose uPVC handle. First, you'll need to close the window and perform an initial fitting. The corners of the sash must align with the casing joint. If it isn't, you can use a screwdriver or a wrench to loosen the handle and reverse the mechanism back into the position it was in.

3. Water Leaks

If you wake up to wet floors and mouldy walls every time it rains it is important that you take action. The leaks of water through windows could cause structural damage to your home, and affect your ability to regulate the temperature inside your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is an easy fix that can be done by any DIYer who is competent. Depending on the severity of the issue is, the old caulking might need to be removed. It is important to remember that when it is about uPVC window repairs you should not be tempted to 'over-caulk in order to make the area harder to clean and could decrease the efficiency of your energy usage.

It is important to check that the drainage holes are free of debris and that the sill pan has been angled correctly so that it drains away from the window. In more serious situations, you might need to consider replacing the window.

Other indicators of long-term water leakage include decayed sills and the appearance of black spots of mold on the walls near the window. This fungus thrives in humid conditions and can propagate quickly throughout the home.

It is also important to note that if the leakage originates from the glass of your double glazed windows, it is more likely to be an issue with the glass seal rather than the frame or sliding. A uPVC specialist can easily fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your upvc window repair windows are stiff to open, or loose and open in a breeze It could be hinges that are at the fault. They can be easily repaired by any DIYer who is skilled and can be done within a few minutes.

Like any mechanical part hinges will be damaged over time. Changing a window hinge is an easy process, but it's easier when you have a person to help you hold the frame up.

It is also important to verify that the uPVC hinges are being opened and closed in the correct direction. Look for the arrows that are on each hinge to determine which way the window should be opened.

The issue could be caused by opening the window incorrectly or due to a poor installation at the factory. This can often be resolved by sending us a photo through our website and we will be pleased to offer you suggestions.

Regular lubrication of hinges is also essential. This can be done by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regularly lubrication will help the window open and close more easily. It can also stop corrosion and decrease the chance of sticking. The ideal time to do this once a year. WD40 and other solvent-based fluids are not recommended since they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by several different factors. The hinges can also be misaligned due to wear, causing a gap between the frame and sash. If they're beyond repair, it could be necessary to have them realigned. The interlock may also become disaligned. This happens on the hinge's side, and could require to be cleaned. In certain instances it might be necessary to replace the hinges.

The seals may wear out or become damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity lenses. This will help control indoor temperatures, and reduce the possibility of draughts.

The final method to cut down on draughts effectively is by using a Draught-excluder. These are usually made of fabric tubes filled with a filler that can be put on top of your window sill. These will help to block out cold air and keep your home warm and cosy!

Your upvc windows can keep providing excellent insulation and security for your home with a little regular maintenance and repairs. It is crucial to recognise that windows last for a certain period of time and there may come a point where it is more efficient to replace them than fix them. If you are experiencing issues with your Upvc windows, it's recommended to seek help from a professional as soon as possible.